Hybrid inverter/charger reversa 10kW

The Elios Inversa 10KW hybrid inverter/charger is a 3-in-1 accessory that allows you to:

• Convert battery current to 120/240V, 120/208V
  
• Recharge the system batteries using a generator in case of prolonged cloudy weather.
  
• Connect the solar system to a generator and transform the current if more power is needed.
  

The Inversa hybrid inverter/charger is suitable for deep cycle lead acid and lithium batteries.

Features :

Inverter:

Inverter type: Pure sine
Transforms the current: 120/240V, 120/208V
Suitable for systems: 48V
Continuous output power at 25°C: 10,000W
Maximum output power: 11,000W
Peak power: 20,000VA

Automatic transfer switch: Yes, with a transfer time of less than 10ms.

The Inversia hybrid inverter/charger features:

1 display screen
3 MPPTs

Charger:

Maximum charge/discharge current: 120A
Battery voltage range: 43V - 63V
Compatible battery capacity: 50 to 9,900Ah
Load regulation: 3 phases with balancing
Built-in automatic generator start

Certifications and protections:

UL 1741-2010/2018, IEEE 1547a-2003/2014, FCC 15 Class B, UL 1741SB, CA Rule 21, HECO Rule 14H
Surge protection (DC Type II / AC Type II)
Short circuit and overcurrent protection
Ground Fault Detection (NEC 690.5)
Reverse polarity detection of PV inputs
Arc flash detection on PV inputs (NEC 690.11)
Integrated PV quick disconnect (NEC 690.12)

Inversa 10KW Hybrid Inverter/Charger - Datasheet (EN)

Inversa 10KW Hybrid Inverter/Charger - User Manual (EN)

Inversa 10KW Hybrid Inverter/Charger - Installation Guide (EN)

Inversa 10KW Hybrid Inverter/Charger - SGS Certificate (EN)

Inversa 10KW Hybrid Inverter/Charger - FCC Certificate (EN)